Disposal methods

Packaging and Packaging Waste Directive (94/62/EC) 1994 amended by Directive 2004/12/EC – Essential Requirements

The Packaging and Packaging Waste Directive (subsequently referred to as the Directive) Annex II specifies the following requirements:

1. Requirements specific to the manufacturing and composition of packaging - Packaging shall be so manufactured that the packaging volume and weight be limited to the minimum adequate amount to maintain the necessary level of safety, hygiene and acceptance for the packed product and for the consumer.

- Packaging shall be designed, produced and commercialized in such a way as to permit its reuse or recovery, including recycling, and to minimize its impact on the environment when packaging waste or residues from packaging waste management operations are disposed of.

- Packaging shall be so manufactured that the presence of noxious and other hazardous substances and materials as constituents of the packaging material or of any of the packaging components is minimized with regard to their presence in emissions, ash or leachate when packaging or residues from management operations or packaging waste are incinerated or landfilled.

Article 11

In addition to these requirements, Article 11 of the Directive states:

-the sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium present in packaging or packaging components shall not exceed 100ppm by weight.

READ SBA POSITION PAPER ON THIS SUBJECT